Logo image for CMC Microsystems

Signal

photo of National Instruments RF PXI-express System

National Instruments RF PXI-express System including a 6.6 GHZ VSA

Equipment Loan / By

The NI RF PXI-express system, available from the CMC Test Equipment Pool, is an 18-slot PXI-express chassis with high-speed controller (Intel quad core, 4 G memory and Dual OS), 6.6 GHz RF Vector Signal Generator, 6.6 GHz RF Vector Signal Analyzer, 6.6 GHz dual 4 X 1 MULTIPLEXER, Xilinx Kintex-7-based FlexRIO FPGA module. This system is an integrated, modular instrument with LabVIEW-based simulation/test environment which enables faster RF test and validation setup and experimental results.

National Instruments RF PXI-express System including a 6.6 GHZ VSA Read More »

photo of Starlight Laser Induced Fluorescence Red Module

Starlight Laser Induced Fluorescence Red Module

Equipment Loan / By

Laser Induced Fluorescence (LIF) is an important analytical technique used in biochemistry. The technique may be used to detect the presence and assess the concentration of many biochemical materials which are selectively tagged with a fluorophore which emits visible radiation under suitable optical excitation. The LIF module offered by CMC consists of a microscope manufactured by Starlight Technical.

Starlight Laser Induced Fluorescence Red Module Read More »

photo of EVERBEING Model C-2 Portable Probe Station

EVERBEING Model C-2 Portable Probe Station

Equipment Loan / By

EVERBEING’s model C-2 portable probe station, with a 12.5” square footprint, is ideal for DC and RF applications for samples of 2″ or less. The C-2 probe station stands on four vibration absorbing feet and is suitable for portable use at a desk, workbench or placement into an environmental chamber. The station is equipped with a USB microscope and vacuum pump for the vacuum chuck. Currently supplied with DC needle probes and 4 positioners, it is set up for DC I-V measurements, diode and transistor characterization and 4-point probe impedance measurements. Options are available from the manufacturer to equip the probe positioners for RF measurements, but this is not currently supported at CMC.

EVERBEING Model C-2 Portable Probe Station Read More »

photo of Agilent N9010A EXA X-Series Signal Analyzer - Frequency Range 10 Hz to 26.5 GHz

Agilent N9010A EXA X-Series Signal Analyzer – Frequency Range 10 Hz to 26.5 GHz

Equipment Loan / By

The Agilent N9010A EXA X-Series Signal Analyzer available from the CMC test equipment pool is a versatile test system that allows you to analyze a variety of signals, from a single tone to complex, modulated tones. It has potential applications in many research areas, including: RF/Microwave , mixed signal design, MEMS, and biomedical. The analyzer comes with a number of automated software application suites, including signal vector analysis, phase noise, and noise figure measurements. The instrument can be accessed and programmed remotely via USB or LAN and is LXI class C compliant.

Agilent N9010A EXA X-Series Signal Analyzer – Frequency Range 10 Hz to 26.5 GHz Read More »

photo of Agilent N9010A EXA Signal Analyzer10-13GHZ

Agilent N9010A EXA Signal Analyzer – Frequency Range 10 Hz to 13.6 GHz

Equipment Loan / By

The Agilent N9010A EXA X-Series Signal Analyzer available from the CMC test equipment pool is a versatile test system that allows you to analyze a variety of signals, from a single tone to complex, modulated tones. It has potential applications in many research areas, including: RF/Microwave, mixed signal design, MEMS, and biomedical. The analyzer comes with several automated software application suites, including signal vector analysis, phase noise, and noise figure measurements. The instrument runs Windows XP Pro operating system, and features Agilent proprietary firmware. Trigger modes include free run, line, video, external 1, external 2, RF burst and periodic timer.

Agilent N9010A EXA Signal Analyzer – Frequency Range 10 Hz to 13.6 GHz Read More »

Photo of National Instruments RF PXIe System Including a 26-GHz VSA

National Instruments RF PXIe System Including a 26-GHz VSA

Equipment Loan / By

The NI RF PXI-express system, available from the CMC Equipment Rental Program, is an 18-slot PXI-express chassis with high-speed controller (Intel quad core, 4 G memory and Dual OS), 6.6 GHz RF Vector Signal Generator, 26GHz GHz RF Vector Signal Analyzer, Source Measurement Unit, 1.5GHz Oscilloscope, 6.6GHz Vector Signal Generator. This system is an integrated, modular instrument with LabVIEW-based simulation/test environment which enables faster RF test and validation setup and experimental results.

National Instruments RF PXIe System Including a 26-GHz VSA Read More »

Photo of National Instruments PXI System with Two FPGAs, Image Acquisition Module, Digital Multimeter, and an Arbitrary Waveform Generator

National Instruments PXI System with Two FPGAs, Image Acquisition Module, Digital Multimeter, and an Arbitrary Waveform Generator

Equipment Loan / By

Modular hardware, managed with LabVIEW software, can be customized for a variety of applications including MEMS and microfluidics testing, video acquisition and processing, particle tracking, pattern matching and general-purpose data acquisition.

National Instruments PXI System with Two FPGAs, Image Acquisition Module, Digital Multimeter, and an Arbitrary Waveform Generator Read More »

Photo of National Instruments PXI System with an FPGA, Arbitrary Waveform Generator, Scope, and Digital Multimeter

National Instruments PXI System with an FPGA, Arbitrary Waveform Generator, Scope, and Digital Multimeter

Equipment Loan / By

Modular hardware, managed with LabVIEW software, can be customized for a variety of applications including MEMS and microfluidics testing, video acquisition and processing, particle tracking, pattern matching and general-purpose data acquisition.

National Instruments PXI System with an FPGA, Arbitrary Waveform Generator, Scope, and Digital Multimeter Read More »

Photo of Agilent 87405A

Agilent 87405A Preamplifier, 10 MHz to 3 GHz

Equipment Loan / By

The 87405A Preamplifier is a multi-purpose instrument for any application that requires low noise and additional gain. The SNR of the final signal in an RF system is greatly impacted by the initial amplification of the signal and its original SNR. By having low noise figure in a preamplifier, the final signal will have a lower noise than without the preamplifier.

Agilent 87405A Preamplifier, 10 MHz to 3 GHz Read More »

Keysight RF PXIe System (upgraded M9381A)

Equipment Loan / By

This Keysight RF PXI-express system chassis, is an 18-slot chassis with a high-speed controller (Intel i7 with 16GB RAM) and a variety of RF and FPGA cards. The system includes a Vector Signal Analyzer (6.6GHz), a Vector Signal Generator (6 GHz with a reference frequency generator), DC power supply, digital I/O’s, Kintex-7 FPGA board, and several supporting accessories for a complete benchtop RF test environment.

Keysight RF PXIe System (upgraded M9381A) Read More »

Photo of Agilent 81130A

Agilent 81130A Pulse Pattern Generator 660 MHz

Equipment Loan / By

The Agilent 81130A pulse generator can output pulses, digital patterns and three or four level signals. Load values other than the standard 50 Ω can be entered to display output values corresponding to the input load. Continuous, external triggered, external gain, external width or manual trigger modes. In the “external” modes the output pulse is enabled by an input signal’s transition, level (high or low), or period and width. The external input allows a maximum 15 Vpp signal and works from Vdc to 150 MHz.

Agilent 81130A Pulse Pattern Generator 660 MHz Read More »

Photo of Agilent 83110A

Agilent 81130A Pulse Pattern Generator 400 MHz

Equipment Loan / By

The Agilent 81130A pulse generator can output pulses, digital patterns and three or four level signals. Load values other than the standard 50 Ω can be entered to display output values corresponding to the input load. Continuous, external triggered, external gain, external width or manual trigger modes. In the “external” modes the output pulse is enabled by an input signal’s transition, level (high or low), or period and width. The external input allows a maximum 15 Vpp signal and works from Vdc to 150 MHz.

Agilent 81130A Pulse Pattern Generator 400 MHz Read More »

photo of Agilent 8110A

Agilent (Hewlett-Packard) 8110A Pulse Generator 150 MHz

Equipment Loan / By

The Agilent 8110A pulse generator can output pulses, digital patterns and three or four level signals. Load values other than the standard 50 Ω can be entered to display output values corresponding to the input load. Continuous, external triggered, external gain, external width or manual trigger modes. In the “external” modes the output pulse is enabled by an input signal’s transition, level (high or low), or period and width. The external input allows a maximum 15 Vpp signal and works from Vdc to 150 MHz.

Agilent (Hewlett-Packard) 8110A Pulse Generator 150 MHz Read More »

Scroll to Top
Skip to content